What mold damage does to your property

1/8/2018 (Permalink)

Moisture is always the cause of indoor mold growth. Mold doesn't just grow on construction materials all by itself, it requires moisture. Control moisture and you control mold growth. The source of moisture is typically one of three origins. Either:

1. Direct water intrusion event such as a roof leak, plumbing leak, poorly sealed leaking windows, drain back-ups, water run-off from showers and bath tubs, etc.
    
2. Indirect water intrusion from rising damp, such as moisture wicking up from the ground or damp concrete slabs into walls, carpet, cabinets, furniture, etc.
    
3. Intermittent water intrusion from condensation caused by humidifiers, vaporizers, high steam, inadequate ventilation, faulty windows, and high humidity.

Mold can grow on any wet building materials, including stucco. Once it is discovered, it must be addressed quickly and properly. Delayed or improper treatment of mold issues can multiply repair costs exponentially.

When building materials such as wood siding, brick, concrete block and stucco are exposed to moisture, over time that moisture can penetrate exterior walls and enter the wall cavity, creating perfect conditions for mold growth in between exterior and interior walls.

Being pro-active is the key to limiting mold damage is being pro-active. If you suspect you have a mold problem, don't ignore it, address it immediately. A common mistake people make is to assume that only visible mold is a problem. In vain, they attempt to wash moldy areas with bleach or cover mold up with new paint, wallpaper, carpet or tile. None of which solves the problem. Unless all mold contaminated materials are removed or properly remediated, mold will keep coming back. The only way to correct indoor mold problems is to eliminate the cause, remove all mold growth and control moisture.

SERVPRO of LaGrange Park/North Riverside is here to help with all your mold damage needs.  Please give us a call at 708-240-4873.  We are always here to help!